PRI 2018: Ultimate Headers Fox Body Swap Headers

Often when we think of technological advances in automotive products, headers are not at the top of the list. However, this has not been the case with Ultimate Headers. They offer some innovative products such as the patented design cast header flanges, tight radius elbows, and collector flanges.

This year’s PRI Show was no different. The crew from Ultimate Headers is releasing a couple of new and exciting products for the ever popular Fox Body Mustang. Ultimate Headers has now developed headers for the Fox body chassis for a Coyote engine swap as well as a product for a Fox body with an LS swap. These swap headers are built around a UPR K-member, and according to Jim Browning Jr., Vice-President at Ultimate Headers, “While these headers were designed for the UPR K-member, it will fit several other applications as well.” The headers consist of 321-stainless steel, all mandrel bends, 1-7/8-inch primaries, industrial cast flanges, and ARP bolt hardware.

Another new product on display was the 2-inch casted elbows. This item will allow for 2-inch primary tubes that will be right at home on engines over 650 horsepower as well as turbocharged, supercharged and nitrous applications. The headers will still have the super tight radius but will now be a 2-inch design versus the standard 1-7/8-inch diameter.

For more information check out Ultimate Headers website at UltimateHeaders.com for all of its innovative products.

Article Sources

About the author

Brian Havins

A gearhead for life, Brian is obsessed with all things fast. Banging gears, turning wrenches, and praying while spraying are just a few of his favorite things.
Read My Articles