New from Total Control Products – custom-fit transmission crossmembers. These units come in kits and can be adjusted to suit the user’s needs. The crossmembers have a maximum width of 29 inches, and come with weld-on frame brackets that can be arranged anywhere on the frame rails to accommodate multiple transmissions. See more details below.
Official Release:
Whether altering drivetrain position or swapping in a non-factory transmission, these weld-in transmission crossmembers from Total Control Products are the correct part for the job. The crossmembers have a maximum width of 29” and ship as unassembled weld-together kits, allowing ultimate flexibility in positioning the drivetrain. By rotating the 1-1/4″ diameter bent tube prior to installing the billet tube adapters, the drivetrain angle is adjustable with a maximum drop height of four inches. Additionally, the weld-on frame brackets can be positioned as needed along the length of the factory rail to easily accommodate transmissions of various lengths. The crossmember bracket accepts common GM-style urethane mounts for directly mounting to most commonly used transmissions. For 2005-up Ford Mustang transmission swaps, a simple adapter bracket is available to convert the three-hole vertical-plane bolt-pattern to the common two-bolt pattern.
Features:
- Maximum width of 29 inches
- Weld-on frame brackets can be placed anywhere on frame to accommodate any transmission
- Ship as unassembled weld-together kits to meet individual purposes
You might also like
The Earliest 1970 Chevrolet Chevelle LS6 Is Still Up For Grabs At No Sale At Auction
Mecum Auctions presents the earliest known 1970 Chevrolet Chevelle LS6 Pilot Car. The restored coupe packs a factory 454 V8 engine.
