FiTech joined forces with TANKS Inc. to make your EFI upgrade as easy as possible. They are offering new fuel tanks supplied with their in-tank pump module. Since fuel injection demands higher pressure from an electric fuel pump, what better place to install the pump than inside the tank!
These new in-tank modules are supplied with a 340 liter-per-hour pump to support up to 800 naturally aspirated horsepower. The pumps bolt directly into the tank’s recessed mount to provide a modern EFI solution to your hot rod, classic truck, or muscle car. The recessed sending unit and pump mount should provide you with all the clearance you need.
Each kit is supplied with a new baffled and pressure-tested fuel tank, as well as an application-specific sending unit, FiTech In-Tank Pump Module, new 340 liter-per-hour pump, and mounting straps. They are outfitted with -6 AN inlet/outlet that provide leak-free fuel line connections.
FiTech EFI was founded on the idea that swapping your vehicle over to EFI should be affordable and easy enough that any weekend warrior could do it. They make sure the programming is simple, despite the advanced technology of the company’s throttle body and port-injection EFI systems.
Teaming up with Tanks Inc. has only bolstered its status in the arena of fuel injection. So, be sure to keep these guys on your radar as they are constantly adding new, simple, and affordable products to the lineup.
For more information about this particular system, and many more, check out both FiTech and Tanks Inc. respective websites.