Unibody cars aren’t known for their stiffness, but there is an easy way to address this shortcoming by adding a set of subframe connectors. When you add a set of subframe connectors, you’re tying the front and rear of the vehicle together, this adds extra strength and rigidity. The reduction in flex will not only make the vehicle ride better, but it will also improve handling.

First-generation Camaros are unibody vehicles, so they will greatly benefit from a set of subframe connectors. Performance Online offers subframe connectors that are totally bolt-on, so that means you don’t have to cut up your Camaro. These 1.250″ x .120 wall DOM tubing subframe connectors match the contours of the Camaro’s floor and bolt on to the front subframe and rear spring mounts. If you’ve added a Performance Online 4-link kit these subframe connectors will bolt directly to the 4-link brackets.

Performance Online wanted to make these subframe connects easy to install, so all of the mounting hardware required to bolt them on is included with the kit. If that wasn’t enough, Performance Online even created a video to show you how to install these subframe connectors. Make sure you check out the video and listen to all the tips Performance Online Lead Technician Randy Garret provides to make the subframe connector installation pain-free. The most challenging thing that you’ll have to do is drill a pair of holes in the subframe connectors.

You can pick up a set of these subframe connectors right here on the Performance Online website.