MAHLE Motorsport now offers a new GM LSX Combo designed for high output, naturally aspirated power adder applications. The PowerPak kit offers the strength of an all forged 2618 aluminum alloy piston to allow for increased detonation resistance and a combination valve pocket design that will cover LS1, LS3 and LS7 cylinder heads.
With listings for flat tops, dishes and domes, this Combo PowerPak Piston Kit will not lock you into a single configuration allowing for changes that can be made as needed. Compression ratios are available from 10:1 through 14:1 and bore options range from 4.000” to 4.185”. The kit comes complete with HV385 coated steel oil ring set: 1.0mm top, napier 1.0mm 2nd and 2.0mm.
If the valve pocket layout is unknown when assembling the short block, these pistons will accommodate an LS1 style cathedral port, LS3 style rectangle port and also LS7 style cylinder heads.
All PowerPak pistons are all dual coated with a Phosphate coating that provides the piston’s characteristic gray appearance. This dry lubricant provides a lubricant film protection in the pin bores and ring grooves.
For more information about MAHLE Motorsport’s GM LSX Combo PowerPak Piston Kit, visit MahleMotorsports.com.
You might also like
New Corvette ZR1X, ZR1 And Z06 Dominate Nurburgring
Chevrolet has finally released Nurburgring times for the Corvette ZR1X, ZR1, and Z06, and as you might imagine, they are spectacular. The Chevrolet Corvette ZR1X, ZR1 and Z06 took over the 12.9-mile Nordschleife cir
