AEM Introduces New High-Flow In Tank Fuel Pump

AEM Performance Electronics has released an E85 High Flow in-tank fuel pump that features a large centered inlet design for high performance naturally aspirated and forced induction EFI vehicles including the 1985-’97 Ford Mustang. The AEM E85 Fuel Pump flows 320 lph (84 gph) at 43 PSI.* Please refer to the chart for fuel pump horsepower versus pressure for various applications and fuel types.

The AEM Center Inlet E85 High Flow Fuel Pump (PN 50-1205) is designed for in-tank mounting and features a compact 39mm diameter that fits most applications. It includes a wiring harness, pre filter, internal fuel hose and clamps, end cap and rubber buffer sleeve. Every 50-1205 AEM E85 Fuel Pump is tested to flow 320 lph at 43 PSI before it is sent to the customer.

AEM says that their E85 fuel pumps feature robust internal construction designed to withstand the low lubricity characteristics of ethanol and methanol fuels. They are tested to work with ethanol fuels up to E100, methanol fuels up to M100 and all types of gasoline.

Flow curves from 35 to 90 PSI and current draw vs. fuel pressure charts are available here.

AEM E85 Fuel Pump Features (PN 50-1205):
Tested and compatible with ethanol fuels up to E100, methanol fuels up to M100 and all types of gasoline
Designed for high output naturally aspirated and forced induction EFI vehicles
In-tank design
Direct fit for 1985-’97 Ford Mustang
Each pump is tested to flow 320 lph @ 43 PSI
39mm diameter fits most applications
Large center inlet design eases installation
Kit includes fuel pump, pre filter, hose, clamps and flying lead

For more information on this fuel pump, you can check out AEM’s web page on the pump here.