Gotta Have It! We Get Our Hands On Those Really Cool Engine Rings

engineringsleadartEvery once in a while we find something that is just different enough to be cool, and cool enough to be different. When we find it, we do our best bring it to our pages to share with all of our gearhead fans. This time we not only saw it, we had a couple of them sent to us so we could see them up close.


You don’t have to be a gearhead to like this grill, it’s just cool as hell!

We saw some cool engine-based barbecue grills a couple years ago, and cool gearhead furniture. Another favorite was the Snap-On steak knives, and it was an instant hit with our Facebook fans, too.

There’s always some great stuff out there for the automotive enthusiast, some are a little over the top and more of a novelty, and others make you want to put up the car posters, neon beer signs, and add some cool decor to set up the man cave.

When we shared another cool item while we were out looking for cool gearhead stuff, we posted it to our Facebook page and it became a big hit. We got quite a few messages about them, so we contacted Bob the Ring Guy at V8Rings and we flat out told him, “Bob, we want to get our grubby hands on those engine rings!”


Check out what's under the hood of these cars - these engine rings look right at home.

Well, it’s obvious that Bob the Ring Guy is a gearhead, too, and he totally understood our incessant need to get our hands on a couple of these bad ass engine rings, so he put together a little care package for us and he sent us three rings to check out.


We never get “tired” of looking at this quad Weber setup.

These rings are made to replicate popular big- and small-block engines from Chevrolet and Mopar, and many of them are adorned with the coolest and most detailed tiny little carburetors and eight-stacks you’ve ever seen. It’s like he yanked the engine out of a 1/24 scale model kit and attached it to your finger. Wait. Why didn’t we think of that?

These rings have cool parts like dual quads, six packs, dual snorkels, and tunnel rams; big names from yesterday and today like Hilborn, Offenhauser, and Moroso are represented on this collection of rings. The detail on these is pretty incredible; it’s easy to see that a lot of time was spent getting the scale and dimensions just right on them.

Whether you want to wear them or display them with some of your other gearhead toys, these rings will always get the conversation started.

Making The Engine Rings

So what does it take to make these rings? We talked with Bob and asked him about the time invested, and it’s definitely a labor of love with these. To make a mold, it might take about 40 hours or more, depending on the detail (and the detail is evident).


This Hemi ring is still in rough form, but a little polishing work and it will be shiny and ready for a gearhead.

Once all of the molds are done, each ring can take up to 15 hours to make. This is a small operation and they don’t churn out hundreds of rings per week, they said they’d be pushing it if they could turn out more than a dozen. If someone wants something completely custom, however, Bob warns us that the cost can increase exponentially.

If they don’t have the molds for whatever is being requested, they have to get pictures and make sure they get the scale right, then create those new molds for each part of the ring. The process is not much different from what any performance parts company goes through to create a new intake manifold, or cast valve covers.

Each ring is made 100% in the USA; the rings are cast in Cincinnati, Ohio, with Pittsburgh, Pennsylvania, being their home base. Each part of this team has a regular job, along with their hobbies of building engines and attending car shows. They’re always on the lookout for what’s new and exciting, too.

It's hard to imagine, but these odd looking things end up being a beautiful engine ring with lots of detail.

Bob said that this business is more his passion, and he said he was thrilled to have us feature some of his rings. We felt the same, because just taking a closer look at these we can tell that he knows engines and does his best to put distributors in the right place, include cylinder head markings – even the headers are correct for big-block and small-block engines. If you look closely at the detailed carburetors, you can even tell the difference between the carburetor manufacturers. The gallery below shows some of the steps taken to create these unique gearhead gifts.

Photo gallery


To mix things up, you won’t just find one metal poured into a single mold, nosiree. There’s occasionally a mix of metals poured into the molds to give each ring a unique look. How about a big-block Chevy engine in sterling silver with brass Moroso valve covers?


This Super Bee and Super Bee Jr. are eyeballing a blown Hemi swap.

Or you can have a Mopar 440 Wedge with a brass six pack and sterling silver valve covers. For you Blue Oval fans, Bob told us that he’s working on some Ford engines and wants to hear from you.

He gave us a list of engines they’d like to do in the future, including: the Coyote; the 427 FE – in Boss 429, 2×4, and AC Cobra; 302/351 Windsor; the Flathead V8; and the 455 Buick. So you Ford guys have something to look forward to and now is the time to get in touch with them.

We told Bob we would rib him a little here about not having any Fords currently, so be sure to drop him a line and let him know which Ford engines you want to see. But be nice to him, Bob’s a great guy with a no BS approach and he will tell you straight up if he can get it made or if it’s going to be a while. They created the 440 Mopar engines after a few requests, so there’s no telling what you might see next. We told him we would like to see a twin turbo setup. We laughed, Bob said, “Send me some pictures.” Did we tell you he was a no BS kinda guy?


Shotgun wedding, or a shotgun wedding ring. Which do you prefer?

So if you want to see that dual quad 302, a Boss 429, or even a Coyote, hit him up and let him know that Street Muscle Magazine sent you to plead with him for more engines and configurations! Remember: you might have missed Father’s Day, but Christmas is not that far away and you have plenty of time to save up.

The rings all sell for just under $300 up to a little over $400, much of it depending on the materials used. If you want some red rubies in your blower scoop, or red butterflies in your shotgun scoop, let him know.

They’ve got quite a collection of over 120 rings to choose from, and you will likely spend a couple hours checking them out and making a decision. Head on over to V8Rings and get yourself something that will definitely be a conversation starter the next car cruise you attend.


This sampling doesn't even begin to scratch the surface. We counted over 120 different rings to choose from, with more on the way, so sayeth Bob the Ring Guy!

Check out the gallery below, we had some fun with these rings and some of our other gearhead toys. By the way, if you can’t figure out which one to get, they also have gift certificates so the gearhead on your list can’t blame you for getting small-block instead of the big-block. So many to choose from.

UPDATE: We told Bob the Ring Guy, “Bob, you MUST make some Ford rings for our Ford fans.” Well, Bob came through and he just sent us these pictures of the Ford rings that they just completed. We told you he’s a no BS kinda guy!

Ask and ye shall receive: Ford small block engine rings. What's next? Reach out to Bob and let him know what you want!

Photo gallery


Article Sources

About the author

Michael Harding

Michael is a full time Power Automedia writer and automotive enthusiast who doesn’t discriminate. Although Mopar is in his blood, he loves any car that looks great and drives even faster.
Read My Articles

Hot Rods and Muscle Cars in your inbox.

Build your own custom newsletter with the content you love from Street Muscle, directly to your inbox, absolutely FREE!

Free WordPress Themes

We will safeguard your e-mail and only send content you request.