Wilwood‘s new swing mount pedal kits fit into a wide range of applications. Whether it’s a racecar, street rod, or Pro Touring vehicle, you owe it to yourself to take a closer look. With an adjustable design to tweak pedal location, and the options for where the master cylinders mount, this kit can be set up exactly the right way to fit your vehicle. 

Official Release:

If you are building a racecar, street rod or Pro Touring vehicle you should be aware of Wilwood’s new Adjustable Reverse Mount Pedal assembly or the new Forward Mount Pedal Assembly that combines the brake and clutch pedals together in one unit.

The Reverse Mount Pedal Assembly positions the master cylinders inside of the firewall, while the Forward Mount Pedal Assembly positions the master cylinders outside on the firewall.

Both units feature an all-aluminum frame and forged aluminum pedal arms with ladder style construction. The pedal pads are of a special adjustable lightweight design that allows fine-tuning of the pedal location and clearance. Also included with the assembly of your choice are the mounting studs, hardware, and clevis and pivot pin balance bar that are designed to provide smooth and accurate settings of the brake pedal bias. The balance bar can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments. The units provide a 6.25 to 1 ratio on both clutch and brake pedal.

Features:

• All-aluminum frame with forged, ladder-style aluminum pedal arms
• Adjustable lightweight design that allows fine-tuning of pedal location and clearance
• Includes mounting studs, hardware, and clevis and pivot pin balance bar