New from UMI – a bumpsteer kit for 1964-72 A-bodies and 1978-88 G-bodies. These kits are bolt-in and allow builders to relocate the outer tie rod and make it be lower or higher than stock, which helps reduce or eliminate toe change during suspension travel. See more details below.
Official Release:
UMI Performance, Inc. is pleased to announce the availability of our race tested bump steer kits for GM A-body and G-body cars. These direct bolt-in kits allow the builder to relocate the outer tie rod end lower than stock (or higher if necessary) which can help reduce or eliminate toe change during suspension travel (aka bump steer). The stud taper is exact factory fit for each application and is constructed of 4140 CrMo for strength and durability. The adjuster is 6061 for lightweight strength and features a hard anodized finish for years of durability. Kits include shims of 0.125”, 0.1875” and 0.250”. These race-tested bump steer kits are 100% designed and manufactured with pride in Philipsburg, PA – USA.
Features:
- Allows builders to relocate the outer tie rod end to be lower or higher than stock
- Helps reduce or eliminate toe change during suspension travel
- Included shims are .125, .1875, and .250-inch