One of the first modifications many enthusiasts did to their C8 was to install a cobbled together nitrous oxide system to get more punch from their Corvette. Nitrous is a known power-adder, but what wasn’t known at the time, was how to make everything fit in the entirely new platform.
Nitrous Outlet has been developing premium nitrous systems for over 20 years, and it didn’t take them long to start measuring and engineering a system directly suited to the mid-engine Corvette platform. Nitrous Outlet has invested over a year’s worth of development into its C8 Corvette nitrous kit and has also created an entire component list, including auxiliary fuel systems, to help augment the installation of nitrous into any C8 Corvette.
Complete Kit (PN 00-10168)
The Nitrous Outlet C8-specific complete plate system is designed specifically for the C8 Corvette’s 90mm intake, includes vehicle-specific solenoid brackets, custom pre-bent hardlines, gaskets, and application-specific hardware. This system includes all of the necessary components; billet aluminum nitrous plate, 50-200 horsepower jetting, hardware, and wiring to properly install a wet nitrous system on your vehicle. The unit comes out of the box with everything you need to spray 200 horsepower but can spray up to 400 horsepower with additional jetting.
Accessories For Any Occasion
Nitrous Outlet also supplies many components to help make the installation of any nitrous system easier and more professional-looking. Its Center Console Switch Assembly brings functionality and super-clean aesthetics to the interior of any gas-fed C8 Corvette. The Nitrous Outlet panel has 2 LED rocker switches for system arm and heater activation, a momentary switch to control the remote bottle opener, and a red push-button for system purge.
Nitrous Outlet also brings even higher output via a larger shot of nitrous without having to go through the expense of upgrading the factory fuel system. It offers two different auxiliary fuel systems in its Fender Mounted System, or the Trunk Mounted one. Both systems feature an E85 compatible fuel pump, a dedicated Aeromotive fuel regulator, which can be used with either high or low pressure by changing the spring in the fuel pressure regulator. Nitrous Outlet’s dedicated fuel systems come complete with fuel cell, mounting brackets, E85 compatible in-tank fuel pump, Aeromotive fuel regulator, Aeroquip 6AN hose, fuel lines, and fittings. The trunk-mounted system’s tank has a 1.375-gallon capacity, and the fender-mounted kit has a custom-built .625-gallon capacity.
Nitrous Outlet also offers individual solenoid brackets and a kit including all necessary hardlines and fittings for installation. The hard lines are specifically made to fit the 2020+ C8 Corvette and Nitrous Outlet’s vehicle-specific solenoid bracket and bottom-exit solenoids. The kit comes with everything needed to upgrade a current plate system from soft to hard lines, for a cleaner and more professional look.
To finalize the plumbing, Nitrous Outlet also offers a purge relocation kit, which includes the parts and hoses necessary to move the purge exit to the front windshield/cowl area of the car for easier viewing. The kit’s thirteen feet of braided nitrous line allows you to run the length of the car and tie into the windshield cowl exit purge fittings and hardline.
Whether supplementing an existing nitrous system or installing a new system, Nitrous Outlet has everything you need to make your C8, or any other car, faster. Check out their website and see for yourself everything Nitrous Outlet has to keep you out in front of the competition.