Doug's offers a full line of headers and exhaust systems for nearly any applicaiton.

For Pertronix, they’ve been serving up quality parts and components for over 40 years. Pertronix has remained the leader in innovative ignition products, which consists of their Pertronix Cast Distributor, and even their Pertronix Ignitor III module.

What’s more, Pertronix can even help performance when it comes to exhaust, too. That’s right, Pertronix also distributes a full line of Doug’s Electronic Cutout systems to turn your quiet street-runner into a full-fledged, open-piped NHRA dragster with the flick of a switch.

Pertronix Cast “Stock Look” distributors for Chevy small-, and big-blocks offer the best of both worlds. These distributors are not only pleasing to the eye by appearing factory, they’re also equipped with the original Ignitor or Ignitor III electronics.

Pertronix Cast Distrbutors Feature:

• All new cast housings molded after the original Delco distributors
• Tailored advance curve for optimum performance and drivability
• Adjustable vacuum canisters for extra tunability
• High dielectric strength cap and rotor with brass contacts
• Legal in all 50 states (C.A.R.B. E.O. #D-57-23)
• Warranty 30 months electronics / limited 1 year mechanical

Pertronix Ignitor III Module Feature:

•  5 times more spark energy than points means increased burn time
• Multi-spark thru the entire RPM range allows for improved combustion
• Increased spark energy for more horsepower & better mileage
• REV limit set by user is accurate up to +/- 50 RPM
• Replaces points or as an upgrade for Flame-Thrower Billet V8 distributors for easy installation

Finally, our prayers have been answered when it comes to a simple, easy-to-use exhaust cut-out system. These systems now include an improved version of Dougs’ popular all stainless steel electric exhaust cut-outs in 2 1/2- and -inch diameters. Engineers at Doug’s have taken the famous electric exhaust cut-outs and dramatically decreased the size for more versatile installations while lowering the price as well.

These cut-outs feature a rugged gear reduction 12 volt DC motor and a rotating gate for a leak proof seal every time the cut-out is opened and closed. Unlike butterfly style cut-outs the Doug’s cut-outs don’t have the leaky gasket sound and when fully opened there is no exhaust flow obstructions.

A pre-wired harness with an illuminated rocker switch is supplied for easy installation. Un-cork your exhaust with the flip of a switch from you dash. The cut-outs are ideal for race tracks that don’t require mufflers. These Doug’s cut-outs are available in singles or pairs and in complete kits with Y-Pipes for easy installation