Once again, Procharger Superchargers has answered the calls of the LS crowd. They are happy to release their new Procharger LS Accessory Drive Kit. This serpentine accessory drive kit is developed with flexibility and adaptability in mind.
Have an LS project you’re currently working on and have plans to supercharge it down the road? The Procharger LS Accessory Drive Kit can be used with or without a supercharger. The engineering and design team know that not all LS projects run full accessories. So they developed their drive kit to work with and without various parts. No A/C, no power steering, no problem! The kit is designed with supercharging in mind, so it is compatible with Prochargers ranging from the P-1SC-1 to the F-1X head unit.
The team at Procharger understands that project vehicles are often built in stages. Using their new LS Accessory Drive Kit will save you time and money in the long run. Install their drive now along with your accessories, and easily add the Procharger supercharger later, with no major disassembly required.
The LS Accessory Drive Kit has a sleek design that’s compact enough to work in tight-fitting engine bays. The design places the 6-rib accessory drive slightly forward, allowing for an 8-rib or 10-rib supercharger drive belt to be installed behind it. Both belt drives utilize heavy-duty spring-loaded tensioners for virtually maintenance-free operation, even after years of high load, high rpm use. Another design feature of the Procharger LS Accessory Drive Kit is that the supercharger outlet can face either direction.
The kit is expandable depending on what you are running on your LS or what you plan to run in the future. While the accessory drive kit is very adaptable, there are a few key things to note. The kit is neither available for the LS7 nor compatible with tall deck engines at this time. It can be ordered without A/C or power steering.
Procharger LS Accessory Drive Base Kit And Options
– Water pump
– Water pump bracket, pulley, and belt
– Crank Pulley and belt
– Alternator bracket, pulley, and belt
Or you can upgrade to include the following:
– Power Steering bracket, pulley, and belt
– A/C Pulley and belt
– Supercharger bracket, tensioner, and belt
Balancer required:
– 8 Rib – ATI #917345
– 10 Rib – ATI # 917347X