The factory suspension on your classic GM muscle car leaves a lot to be desired. That’s why Speed Tech Performance has just released their new AFX Forged Aluminum Drop Spindles. Get a better performing suspension without any fabrication needed, and for an exclusive price by mentioning this press release.

Official Release:

SPEED TECH PERFORMANC AFX Forged Aluminum Drop Spindles

Our forged aluminum AFX spindles are the most advanced front suspension piece available for your GM muscle car. ATS took an entirely new approach to improving the less than optimal factory suspensions of the A, F, X, and G body GM platforms by scratch designing the focal point of the front geometry. Designed to fit the 64-72 A body, 67-69 F body, and 68-74 X body, and 78-88 G-body, platforms, the spindle is forged out of ultra strong, lightweight 6061 T6 aircraft spec aluminum. Highly modernized C5 Corvette sealed hub assemblies bolt to the spindles with a one-inch ride height drop, while the larger bearing pack offers higher load capacity, individual wheel speed sensors, and wheel fitment that does not alter the track width or bolt pattern of the vehicle. Requiring no fabrication or modifications to install, the AFX spindle bolts directly in place of the OEM assembly to either factory or aftermarket tubular control arms. For A-body and G-body, our steering arms are required and bolt to the spindle to make use of factory linkage or steering rack kits, but with revised geometry to bring bump steer numbers down to nearly zero.

Features include:

• Forged from ultra lightweight, exceptionally strong 6061 T6 aluminum
• Uses sealed C5 Corvette hub assembly with integrated wheel speed sensor
• Press-in hardened aluminum ball joint inserts prevent wear and fatigue
• Revised bolt-on steering arm location improves bump steer
• Direct bolt-on spindle replacement for A-F-X-G body vehicles
• One inch ride height drop for lowered look

Baer GT Brake System

The Baer GT brake system is an affordable big brake package using the large 2 piston PBR GT calipers that provides increased pad volume for the best bang for the buck performance going. Rotors are 12.79″ 1-Piece and are cross-drilled, slotted and zinc-coated silver. A complete bolt-on kit with pads, lines, and all hardware.

Minimum wheel diameter 17″

Mention this ad for this limited time offer!!!

Regular price: $1944

Special price: $1599

Savings: $345!!!

Call today 1-888-467-1625

Email: info@speedtechperformance.com