Moroso Helps The Novice Drag Racer Who Wants To Step Up Their Game

Like many racers, you might begin your effort at the dragstrip with a relatively stock driver. Then you get the itch to step up the performance ladder by dropping the e.t.’s on your time slip. There are a wealth of great articles online for the novice racer, such as this one from Dragzine.com.

Spending some enjoyable street and grudge nights at your local strip is great, but it probably won’t be long before you get the bug to step up your horsepower.

We reached out to Thor Schroeder, marketing manager at Moroso Performance, regarding proper equipment requirements to begin competing at your next level.

Focus On Performance

Whether you are moving up in either the heads-up or bracket racing ranks, consistency is key when reading your time slips and making engine or chassis changes based on that data. Many good technical articles are dedicated to dragstrip drive tire choices. Once those decisions are made, it’s time to focus on safely achieving peak performance.

“Just a simple tire pressure gauge could be giving you inconsistent readings,” says Schroeder. “If you are going to step up to a D.O.T. performance street-and-strip tire or an all-out drag slick, working out your optimum pressure and repeating round after round is critical.”

Though our swap meet tire pressure gauge is in great condition, we picked up on a problem. We learned that you could first set a low, 9-PSI pressure on our slicks and immediately take another reading with the same gauge and see up to a 1.5-PSI difference. We questioned which reading was correct? That difference, especially between left and right slicks, will result in an inconsistent race car.

Comparing the Moroso tire pressure gauges with a 0- to 40-psi gauge range is a good general tool to monitor both front and rear tires. “For less than a 20-dollar price difference, a racer can step into our higher level gauge,” explained Schroeder.

The strong point for our high-quality tire gauges is that they are individually calibrated for accuracy within two percent or even ½-percent. – Thor Schroeder

Moroso Performance offers some exceptional pressure gauges. Its offerings have different pressure readouts and three different accuracy levels. The first level is what Moroso describes as a “Garage Series” gauge they recommend to “check pressures around the garage. This is a gauge you don’t mind your buddies borrowing.”

The most accurate Moroso gauges are produced in either analog or digital readout. The gauges can offer the ultimate accuracy to ½-percent. To spell that out, let us say you are running 10-PSI in your rear tires; these gauges are accurate within .05-PSI. The digital gauges offer a readout to .01-PSI.

Tire Selection

With your tire pressures monitored to the highest degree, we’ll look at the tire offerings from Moroso with front rolling stock dedicated for the dragstrip. The Drag Special and DS-2 units are track-only tires offering minimal rolling resistance under acceleration and a broad footprint during braking for increased track contact.

“Both lines of tires are a bias ply design,” described Schroeder. “The Drag Special tire is our original design that still has a large following. It’s a 2-ply nylon cord, tubeless design with a high cord angle. A unique tread design reduces rolling resistance and lowers the unsprung weight on your front end.”

The original Moroso Drag Special features a strong mounting bead. This bead allows adjustment for starting line roll-out by allowing varied tire pressure. The newer DS-2 tire by Moroso has a unique aircraft tire styled asymmetrical tread. This tire series has been tested to 225-MPH with a 1,000-pound front-end weight.

Schroeder commented about the DS-2 tire, “They’re tough for a drag tire, and unlike a standard D.O.T. tire, the DS-2 is very lightweight. Plus, it offers very low rolling resistance and high-speed stability. The DS-2 does not walk or have any tread flex characteristics, which is the last thing you want at high speeds.”

If you are scrutinizing your tire pressures to that level, one enemy– the sun– could have you chasing your tail in the staging lanes. On a warm summer day, direct sunlight on your tires can spell a big change in pressure as the black surface warms the tire’s air. This increases tire pressure. The same, but the opposite effect can quickly happen when clouds or sunset drop the tire pressure just as quickly.

Moroso was one of the innovators of a heavy-duty tire cover that reflects sunlight. Made from reflective 6-mil vinyl combined with an insulator backing, these covers maintain the stability of your tire pressures and prevent rubber degradation. Consider if one rear drag slick in the sun raises as little as 1/2-psi in pressure compared to the other. Differences in pressure and rolling diameter can cause havoc in starting line launches and consistency.

It's a sunny day, and you spend some quality time waiting in the staging lanes for your next pass. These Moroso tire covers can either mount to your doorslammer with suction cups or directly drape the slicks themselves. Blocking the hot sun's rays keeps tire pressures consistent before each pass.

Wheels, Studs, And Lug Nuts

As a guideline, when you continue to lower your e.t. at the track, the sanction rules list gets longer. Closely related to rolling stock, once your entry graduates beyond bone-stock, the tech man is going to examine your aftermarket wheels, wheel studs, and lug nuts for safety features.

The first order of business in lug nut/wheel stud safety will be your thread engagement. The rule of thumb is that a minimum length of threads between the stud and lug nut must be greater than the wheel stud diameter. For example, if you have 7/16-inch diameter wheel studs, there must be more than 7/16-inch thread contact.

Improving your wheel studs and lug nuts not only makes the tech man happy, it vastly strengthens one of the weakest drivetrain links. Not only can you replace your O.E.M. studs with longer and hardened Moroso hardware, but you can also increase the stud diameter for additional strength.

Improving the stock studs with another pressed stud is a step forward. Moroso offers its studs in high-grade SAE 8740 steel. By researching your stock stud specs, you can easily find an English or metric Moroso stud match. Once you enter the world of aftermarket performance axles, Moroso has 1/2- and 5/8-inch studs that are screwed through the axle flange, not pressed.

“Dick Moroso was one of the first people to think about the idea of wheel studs many years ago following some broken studs on his racing Corvette,” says Schroeder. “Historians argue both ways concerning who created wheel studs first, but Moroso was one of the first companies to manufacture high-strength wheel studs.”

Extra-long studs typically require open-end lug nuts to allow the stud to extend through the nut, hands-down your strongest and most worry-free option. If you have ever witnessed a wheel and tire violently exit a car on the starting line, you know the best wheel stud setup can prevent big damage down the road.

When you begin adding anything from dragstrip radials to all-out drag slicks to your car, you can count on the tech person looking at your wheel fastening hardware.

Tire Marking

One final and unique addition to your trailer toolbox should be a Race Write marker from Moroso Performance. You may immediately say, “Wait, that’s for writing dial-ins on race cars.” Well, it is. But the handy marker is utilized for tire marking as well.

“Race Write is a handy tool for monitoring and tuning tires and suspension settings,” adds Schroeder. “Racers will place a mark between the tire sidewall and wheel to check for tire slippage. You can also place a ring of the bright white marker around the circumference of the tire and a wide band across the sidewall.”

The Moroso Race Write marker can indicate tire slippage between tire and wheel. You can also place a wide marking across the sidewall to visually witness how much the tire is rotating at launch compared to the car's forward motion. Whether used on tires or window dial-ins, this marker is easily removed compared to traditional shoe polish.

Schroeder also interjects, “Racers will closely look at the sidewall marking following a pass. Depending on the degree of squatting or wrinkling, the marking will change in the areas with the most deflection. These markings provide a pattern across the sidewall for you to read.”

The Moroso digital tire gauge includes a readout to within .01-psi. This is now our go-to instrument for both front and rear pressure adjustments.

In this digital video age, crew people are getting savvy at recording a launch and critical first few hundred feet of a pass to replay—a marked tire helps review those videos. One of the positives of Race Write is that it is formulated to be easily removed by simply wiping firmly with a clean rag.

When stepping up your program, be sure not to cut corners when it comes to the hardware. The same applies to the tuning tools you use to achieve faster performance. There is no greater satisfaction than going faster and knowing your car every step of the way.

Article Sources

About the author

Todd Silvey

Todd has been a hardcore drag racing journalist since 1987. He is constantly on both sides of the guardwall from racing photography and editorship to drag racing cars of every shape and class.
Read My Articles

Hot Rods and Muscle Cars in your inbox.

Build your own custom newsletter with the content you love from Street Muscle, directly to your inbox, absolutely FREE!

Free WordPress Themes
Street Muscle NEWSLETTER - SIGN UP FREE!

We will safeguard your e-mail and only send content you request.

Street Muscle - The Ultimate Muscle Car Magazine

We'll send you the most interesting Street Muscle articles, news, car features, and videos every week.

Street Muscle - The Ultimate Muscle Car Magazine

Street Muscle NEWSLETTER - SIGN UP FREE!

We will safeguard your e-mail and only send content you request.

Street Muscle - The Ultimate Muscle Car Magazine

Thank you for your subscription.

Subscribe to more FREE Online Magazines!

We think you might like...



Classic Ford Performance

Drag Racing

Classic Chevy Magazine

Street Muscle - The Ultimate Muscle Car Magazine

Thank you for your subscription.

Subscribe to more FREE Online Magazines!

We think you might like...

  • Classic Ford Performance
  • Drag Racing
  • Classic Chevy Magazine

Street Muscle - The Ultimate Muscle Car Magazine

Thank you for your subscription.

Thank you for your subscription.

Street Muscle - The Ultimate Muscle Car Magazine

Thank you for your subscription.

Thank you for your subscription.

Loading